Filter
Top Products
CHAPTER 5 FUNCTIONS
5-4
Copies can be sorted into the required number of sets by storing
original images in the memory before performing copying.
* The 15 ppm copier requires the optional memory copy board to
perform sort copying.
1
Press the Sort key to light the indicator.
* With the 18 ppm copier, the Sort indicator automatically
turns on when originals are set in the DF.
(English text panel) (Symbol panel)
2
Set the number of copies to be made.
3
Set the originals.
* When using the platen, make sure that the originals are in
the correct sequence.
* With the 15 ppm copier, if “ON” is selected for “DF auto
start”, scanning starts automatically when an original is set
in the DF (see page 6-3). Proceed to step 5.
2. Sort copying
4
Press the Start key.
* If originals are set in the DF on the 18 ppm copier, originals
are scanned one by one and copied.
(English text panel) (Symbol panel)
5
When scanning of the first original ends, “1” (number of
scanned originals) appears on the display. Place the next
original. When using the platen, press the Start key. Repeat
the same procedure for all the originals.
(English text panel) (Symbol panel)
6
When scanning of all the originals ends, press the Zoom
Input/Enter key or Sort key. Copying will start.
(English text panel) (Symbol panel)