Filter
Top Products
9-8
Fax Settings > Default fax settings
TX/RX Restriction
This function allows you to send or receive originals only when communication requirements are met.
For details, refer to Transmission Restriction on page 9-10.
Forward Settings
When you have received a fax, you can forward the received image to other faxes and computers or specify a number of
copies.
For details, refer to Memory Forwarding on page 6-2.
2 in 1 Print When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the
original at a time on one Letter or A4 size sheet of paper.
Value: On, Off
For details, refer to 2 in 1 Print on page 5-11.
Batch Print When a multi-page fax is received, the pages are printed in a batch after all pages are received.
If [Off] is set, each page is printed as it is received.
Value: On, Off
For details, refer to Batch Print on page 5-11.
Rings (Normal) If the reception method is fax automatic reception, the number of rings until the machine
answers a call can be changed as needed.
Value: 1 - 15
Rings (Answering Machine) If the reception method is FAX/Answering Machine Auto Switch Reception, the number of rings
until the machine answers a call can be changed as needed.
Value: 1 - 15
Rings (FAX/TEL) If the reception method is FAX/TEL Auto Switch Reception, the number of rings until the
machine answers a call can be changed as needed.
Value: 0 - 15
For Rings (FAX/TEL), this change is possible with some countries.
Reception Mode Select the reception mode.
Value: Auto (Normal), Auto (FAX/TEL), Auto (Answering Machine), Manual, Auto (DRD)
If Auto (DRD) is selected, select the DRD Pattern.
Value: Pattern 1 (Normal Ring), Pattern 2 (Double Ring), Pattern 3 (Short-Short-Long), Pattern
4 (Short-Long-Short)
DRD reception mode is available for some countries.
For details, refer to DRD Reception (Available for inch versions only) on page 7-6.
Remote SW Dial To start fax reception by operation from the connected telephone set, use the following
operation.
Value: 00 - 99
For details, refer to Remote Switch Function on page 7-10.
Encrypted Reception Turns on reception by encrypted communication.
Value: On, Off
If turned on, select the encryption key.
For details, refer to Encryption on page 6-36.
Item Description