Kyocera FS-3640MFP Fax Machine User Manual


 
4-11
Sending Faxes > Original scan settings
1
Display the screen.
For details, refer to the machine’s Operation Guide.
Selecting the FAX Resolution
Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
1
Display the screen.
Item Description
200 × 100 dpi Normal when sending originals with
standard size characters
Typical character size: 10.5 point
(example:
Resolution Resolution)
200 × 200 dpi Fine when sending originals
with relatively small characters
and thin lines
Typical character size: 8 point
(example:
Resolution Resolution)
200 × 400 dpi Super
(Super Fine)
when sending originals with
minute characters and lines
Typical character size: 6 point
(example: Resolution Resolution)
400 × 400 dpi Ultra
(Ultra Fine)
when sending originals with
minute characters and lines
more finely
Typical character size: 6 point
(example: Resolution Resolution)
NOTE
The default setting is 200 × 100 dpi (Normal). The higher the resolution, the clearer the
image, but the fax transmission time is longer.
The scan resolution must to equal to or higher than the fax resolution. If the fax resolution is
higher than the scan resolution, the scan resolution will automatically change to the same
setting as the fax resolution.
Functions
Original Size
Close
10:10
Original Orientation
1-sided
Duplex
1/3
Add/Edit
Shortcut
Ready to send.
FAX TX Resolution
200x100dpi Normal
A4
Top Edge on Left
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
1
2
GB0669_00
GB0673_00
Functions
Original Size
Close
10:10
Original Orientation
1-sided
Duplex
1/3
Add/Edit
Shortcut
Ready to send.
FAX TX Resolution
200x100dpi Normal
A4
Top Edge on Left
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
1
2
GB0669_00
GB0673_00
Use [ ] or [ ] to scroll up and down.