Filter
Top Products
Setup
NETWORK SCANNER SETUP GUIDE 5
Network Settings
Registering the IP Address
Check the IP address with your network administrator before changing this setting.
You can enter an IP address only when the DHCP setting is Off and the TCP/IP
setting is On. Any changes made to the network settings will only become effective
after you turn the machine off and then back on again.
1 Access IP Address.
2 Use the numeric keys to enter each segment of the IP address in turn,
pressing X or [*.] to move between segments.
If you make an error in entering a portion of the IP address, press
W to
return to the previous block of digits and re-enter the correct number.
3 Press Enter on completion.
4 Register the Subnet Mask - refer to Registering the Subnet Mask on page 6.
System Menu/
Counter
S or T
System Setting
Enter
S or T
Network Setting
Enter
S or T
TCP/IP Setting
Enter
S or T
DHCP
Enter
S or T
Off
Enter
S or T
IP Address
Enter