Kyocera KR1 Network Router User Manual


 
22 Kyocera KR1 Mobile Router User Guide
Advanced > Performance
Wireless Performance- Displayed in this window are the Wireless Performance features for the Access Point portion of the
Kyocera KR1 Mobile Router.
Beacon Interval- Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. By
default the Beacon Interval is 100. This is the recommended setting.
RTS Threshold- This value should remain at its default setting of 2312. If inconsistent data flow is a problem, only a
minor modification should be made.
Fragmentation- The fragmentation threshold, which is specified in bytes, deter-mines whether packets get
fragmented. Packets exceeding the 2346 byte setting are fragmented before transmission. By default
the Fragmentation is 2346.
DTIM interval- (Delivery Traffic Indication Message). A DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages. By default the DTIM interval is 3.
TX Rates-Auto- is the default selection. Select from the drop down menu.
Mode Setting- Select G Mode is your wireless network consists of only 802.11g clients. If your wireless network
includes 802.11b clients, select Mix Mode.
Preamble Type- Select Short or Long Preamble. The Preamble defines the length of the CRC block (Cyclic Redundancy
Check is a common technique for detecting data transmission errors) for communication between the
Kyocera KR1 Mobile Router and the roaming wireless network adapters. Note: High network traffic
areas should use the shorter preamble type. By default the Preamble Type is Short Preamble.
SSID Broadcast- Choose Enabled to broadcast the SSID across the network. All devices on a network must share the
same SSID (Service Set Identifier) to establish communication. Choose Disabled if you do not wish to
broadcast the SSID over the network. By default the SSID Broadcast is Disabled.