Filter
Top Products
Troubleshooting 41
• If you are using 2.4GHz cordless phones, X-10 equipment, or other home security systems, ceiling fans, or lights, your
wireless connection may degrade dramatically, or drop altogether.
To avoid interference, change the Channel on the Kyocera KR1 Mobile Router, and all devices in your network.
• Keep your product at least 3-6 feet away from electrical devices that generate RF noise. Examples include: microwaves,
monitors, electric motors, and so forth.
6. I forgot my encryption key. What should I do?
• If you forgot your encryption key, the WiFi card will be unable to establish a proper connection.
If an encryption key setting has been set for the Kyocera KR1 Mobile Router, it must also be set for the WiFi card that
will connect to the Kyocera KR1 Mobile Router.
To reset the encryption key(s), login to the Kyocera KR1 Mobile Router using a wired connection.
(Please refer to “Basic > Wireless (Security–No Encryption)” on page 9, for additional information).
7. How do I reset my Kyocera KR1 Mobile Router to its factory default settings?
If other troubleshooting methods have failed, you may choose to Reset the Kyocera KR1 Mobile Router to its factory default
settings.
To hard-reset the Kyocera KR1 Mobile Router its factory default settings, follow the steps listed below:
1. Ensure the Kyocera KR1 Mobile Router is powered on
2. Locate the Reset button on the back of the Kyocera KR1 Mobile Router.
3. Use a paper clip to press the Reset button.
4. Hold for 10 seconds and then release.
5. After the Kyocera KR1 Mobile Router reboots, it is reset to the factory default settings.
Note: Please note that this process will take a few minutes.
Pressing the Reset Button
restores the KR1 to its
original factory default settings.