Filter
Top Products
2.3 Attaching the Drive Stand
You can use your LaCie drive in its upright position after installing the stand.
1) From the rear of the drive, slide the stand rail into the side
groove of your LaCie drive as shown.
2) Slide the stand forward until its rail touches the rear of
the drive.
3) Tighten the two socket screws from the underside of the
stand, using the hex key provided, until the stand is firmly
in place.
4) When the stand is mounted, your drive should look like this:
2.4 SCSI Cables and Connectors
LaCie SCSI Hard Drives are supplied with a 68-pin to 68-pin cable ( Ultra 320
LVD version – Wide SCSI). If the SCSI cable supplied with your LaCie d2 Hard
Drive does not meet your requirements, please contact your computer supply
specialist, who will be able to help you choose the right SCSI cable for your
particular setup and applications.
Getting to Know Your LaCie Hard Drive
page 9
LaCie d2 SCSI Hard Drive
68-pin SCSI connector (Wide SCSI only)