Filter
Top Products
2 - 4 Component Identification
Component Locations - Front
1
Platen Cover or Document Feeder (optional)
Lower the platen cover over originals placed on the exposure glass for copying. If you have the document feeder,
insert a stack of originals here. They will be fed automatically. When the document feeder (RADF) is installed,
you can copying two-sided originals. (The illustration shows the document feeder.)
2
Exposure Glass
Position originals here face down for copying.
3
Internal Tray
Copied paper is delivered here face down.
4
Ventilation Hole
Prevents overheating. Do not obstruct the ventilation hole by placing or leaning an object near it. If the machine
over-heats, a fault might occur.
5
Main Power Switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned on.
If it is off, turn it on.
6
Behind Cover
Flip up when you use the keys underneath.
7
Main Power Indicator
This indicator lights up when the main power switch is turned on, and goes off when the switch is turned off.
8
On Indicator
This indicator lights up when the operation switch is turned on, and goes off when the switch is turned off.