Filter
Top Products
System Settings
User Tools Settings 5 - 5
10. Auto Tray Switch (for
copy mode only)
If you load paper of the same size in two or more trays, the
machine automatically shifts another tray when the tray in
use runs out of paper. You can set or cancel this setting.
If you put special paper in paper trays using the Special
Paper Indicate menu, the Auto Tray Switch function is
available to these trays only when their settings are
identical.
Default: On
11. Print Priority (setting the
multi-accessing function)
Sets the print priority for each mode.
•“Display”
Print priority is given to the mode displayed on the
display.
•“Copier”
Print priority is given to the copy function.
•“Fax”
Print priority is given to the fax function.
• “Printer”
Print priority is given to the printer function.
• “Interleave”
Prints jobs in the order in which they are initiated
regardless of mode/function.
Output from each function might be mixed. If you want to
avoid such mixing, specify an independent tray for each
feature using “Output Tray Prio.”. When using different
functions, attaching internal tray 2 allows you to specify an
independent tray for each function. If you want to attach
one, contact your local dealer.
Default: Copier
12. Display Contrast You can adjust the brightness of the panel display.
13. Paper Status You can select the condition of the paper (Normal or Dry).
14. Key Op. Tools
1 Show Counter
2 Print Counter
3 Key Op. Access
4 Prog. Key Op. Code
Use to view or print counter and set up user codes.
Menu Description