Filter
Top Products
Can Not Make Proper Copies
Service and Supplies 6 11
Can Not Make Proper Copies
Combine
Duplex
Problem Cause Action
Parts of the image are not
copied.
You specified an improper
reproduction ratio that does not
meet the sizes of your originals
and copy paper.
When you specify a
reproduction ratio using Manual
Paper Select mode, make sure
the ratio matches your originals
and the copy paper.
Note: Select the correct
reproduction ratio before using
Combine mode.
Order of copies is not correct. You set originals in the incorrect
order.
When setting a stack of
originals in the document
feeder, the last page should be
on the bottom.
If originals are set on the
exposure glass, start with the
first page to be copied.
Problem Cause Action
Order of copies is not correct. Originals were set incorrectly. When setting a stack of
originals in the document
feeder, the last page should be
on the bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
Orientation of copies (Top to
Top, or Top to Bottom) is not
correct.
Originals were set incorrectly or
orientation setting is incorrect.
Select the correct orientation or
set originals correctly.
In Margin Adjustment mode,
parts of the original image are
not copied.
The margin is too wide. Set a narrower margin with the
user tools.