Filter
Top Products
When the Machine Does Not Operate Properly
Service and Supplies 6 9
When the Machine Does Not Operate Properly
Message
Display
Machine Status Problem/Cause Action
Please wait. The machine is warming up. Wait for the machine to warm
up.
Cannot detect original size. Improper original is set. Set non-standard size original
on the exposure glass.
Input the horizontal and vertical
size of the custom original.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/
Enlarge mode.
Original is not set. Set your originals.
Check original orientation. There is no copy paper that is in
the same direction as the
original.
Set the original in the same
direction as the copy paper.
Check paper size. Improper paper size is set. Select proper paper size.
You cannot enter the desired
copy set number.
The number of copies exceeds
the maximum copy quantity.
You can change the maximum
copy quantity that you can
make at a time.
The machine instructs you to
set the duplex tray.
---------------------- Reset the duplex tray correctly.
The machine instructs you to
set the key counter.
---------------------- Set the key counter.
Problem Problem/Cause Action
The display panel is off. The machine is in Energy Saver
mode.
Turn on the operation switch.
The operation switch is turned
off.
The main power switch is
turned off.
Nothing happens when the
operation switch is turned on.
The Main Power switch is
turned off.
Turn the Main Power switch on.
The power cord is unplugged. Plug the power cord in securely.