Filter
Top Products
Supplementary Informations
113
5
• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce/Enlarge function, “
Blank part will appear. Check ori-
entation.
”message may appear depending on the orientation of origi-
nals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the optional booklet finisher, the
machine staples and folds the paper in the centre, then delivers the paper
folded.
• If you select Saddle Stitch function in Magazine mode, the machine staples
the paper, and folds it like a book, then delivers the paper folded.
❖ Punch
• When using Punch and Combine, Double Copies, or Auto Reduce/En-
large, the message "
Blank part will appear. Check orientation."
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary
slightly.
• Punchable paper sizes are as follows:
• The punch hole positions change according to the orientation of the paper
selected.
With 2 Tray finisher
Punch kit type
2 & 4 holes type 2 holes L
A3-A5, 11" × 17"-5
1
/
2
" × 8
1
/
2
"
K
A4-A5, 8
1
/
2
" × 11"-5
1
/
2
" × 8
1
/
2
"
4 holes L A3, B4 JIS, 11" × 17"
K
A4, B5 JIS, 8
1
/
2
" × 11"
4 holes type 4 holes L
A3-A5, 11" × 17"-5
1
/
2
" × 8
1
/
2
"
K
A4-A5, 8
1
/
2
" × 11"-5
1
/
2
" × 8
1
/
2
"
2 & 3 holes type 2 holes L
A3-A5, 11" × 17"-5
1
/
2
" × 8
1
/
2
"
K
A4-A5, 8
1
/
2
" × 11"-5
1
/
2
" × 8
1
/
2
"
3 holes L A3, B4 JIS, 11" × 17"
K
A4, B5 JIS, 8
1
/
2
" × 11"