Lanier LD235 Copier User Manual


 
Copying
32
2
D Enter the desired ratio with the
number keys, followed by [#].
E Press [OK].
To specify a ratio with [n] and
[o]
A Press [With no].
B Press [Horizontal].
C Adjust the ratio using [n] or
[o].
Note
Pressing [n] or [o] changes
the ratio in increments of 1%.
Pressing and holding down
[n] or [o] changes it in in-
crements of 10%.
If you have incorrectly en-
tered the ratio, readjust the
ratio with [n] or [o].
D Press [Vertical].
E Adjust the ratio with [n] or
[o].
F Press [OK].
D Press [OK].
E Place your originals, and then
press the {Start} key.
Directional Size Magnification
(mm)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
Note
Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown.
You can enter sizes within the fol-
lowing ranges:
Metric
version
Vertical: 1–999 mm
(in increments of 1 mm)
Horizontal: 1–999 mm
(in increments of 1 mm)
Inch
version
0.1"–99.9"
(in increments of 0.1")
CP2M01EE