Lanier LD235 Copier User Manual


 
Specifications
114
5
Duplex
You cannot use the following copy paper with this function:
Paper smaller than A5K, 5
1
/
2
" × 8
1
/
2
"K (possible on A5L, 5
1
/
2
" ×
8
1
/
2
"L)
Paper thicker than 105 g/m
2
, 28 lb.
Paper thinner than 64 g/m
2
, 17 lb.
Translucent paper
OHP transparencies
Label paper (adhesive labels)
•Postcards
When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
During copying, the image is shifted to allow for the binding margin.
The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5L, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL
Combine
In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
The reproduction ratios you can specify are 25–400%.
If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
You cannot use custom size paper.
If the orientation of originals is different from that of the copy paper, the ma-
chine will automatically rotate the image by 90
°
to make copies properly.
If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.