Lanier LD235 Copier User Manual


 
Copying
62
2
Stamp position and original orientation
Note
You cannot use the bypass tray
with this function.
Only one message can be stamped
each time.
Reference
p.100 “Stamp Language”
p.100 “Stamp Position”
p.100 “Stamp Format”
A Press [Edit / Stamp].
B Press [Stamp].
C Press [Preset Stamp].
D Select the desired message.
E Press [All Pages] or [1st Page Only] to
select the print page.
Note
You can change the position,
size, and density of the stamp.
See p.62 “Changing the stamp
position, size and density”.
F After you specify all desired set-
tings, press [OK].
G Press [OK].
H Place your originals, and then
press the {Start} key.
Changing the stamp position, size and
density
A Press [Change].
B Select the position for print, size,
and density, and then press [OK].
User Stamp
Copies with the registered stamp.
Preparation
You have to register a user stamp
before using this function. See p.63
“To program the user stamp”.
GCSTMP5E
GCSTMP0E