Filter
Top Products
Copier Functions
33
2
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Press [Dir. Size Mag mm].
D Enter the horizontal size of the
original with the number keys,
and then press [#].
E Enter the horizontal size of the
copy with the number keys, and
then press [#].
F Enter the vertical size of the origi-
nal with the number keys, and
then press [#].
G Enter the vertical size of the copy
with the number keys, and then
press [#].
Note
❒ To change a length, press the
key you want to change and en-
ter the new value.
H Press [OK].
I Press [OK].
J Place the originals, and then press
the {Start} key.
Sort
The machine can scan originals into
memory and automatically sort cop-
ies.
Reference
Related initial settings
p.103 “Select Stack Function”
p.103 “Memory Full Auto Scan Re-
start”
p.103 “Rotate Sort: Auto Paper
Continue”
p.92 “Auto Tray Switching”
❖ Sort
Copies are assembled as sets in se-
quential order.
❖ Rotate Sort
Every other copy set is rotated by
90°KL and delivered to the copy
tray.
Note
❒ To use the Rotate Sort function,
two paper trays loaded with
same size and type paper, but in
different orientation (KL), are
required. See “ Paper Type:
Tray 1–4” in “Tray Paper Set-
tings”, General Settings Guide.