Filter
Top Products
of the PPP connection will be set to the smaller one of MTU and the
peer’s MRU. The default is value 1492.
Maximum Segment Size is the largest size of data that TCP will
send in a single IP packet. When a connection is established between
a LAN client and a host in the WAN side, the LAN client and the WAN
host will indicate their MSS during the TCP connection handshake. The
default value is 1432.
When it is checked, it will maintain the PPP
connection all the time. If the ISP shut down the PPP connection, it will
automatically reconnect PPP session.
When option is chosen, the PAP mode will run
first then CHAP.
will be displayed at the bottom of this page
to show all the Session Names with its Adapter (PVC number), Mode
(PPPoA or PPPoE), Service Name, Account to Use (PPP Account ID),
Disconnect Timeout configuration, MRU, MTU, MSS, Authentication
Mode (Auto, CHAP or PAP), and Auto Reconnect configuration.
To configure the PPP, must go to the
page first
to configure Account ID, Users Name and Password.