Filter
Top Products
Network Address Translation capability between LAN and multiple WAN
connections, and the LAN traffic is routed to appropriate WAN connections
based on the destination IP addresses and Route Table. This eliminates the
need for the static NAT session
configuration between multiple LAN clients and multiple WAN connections.
When the Dynamic NAPT is chosen, there is no need to configure the NAT
Session and
NAT Session Name Configuration.
The option maps the single WAN IP addresses to many
local PCs IP addresses.(1xN). It is the multiple-mapping
mechanism. For each WAN Interface, more than one local PCs
can be associated with one WAN Interface. Click the link
to add the session name for
WAN interface.
This field allows the user to select the session from
the configured NAT Session Name Configuration.
This filed allows the user to assign the IP address to map
the corresponding NAT/NAPT sessions.
will be displayed at the middle of this page to