Changes or modifications not expressly approved by the party responsible for
compliance to the FCC Rules could void the user's authority to operate this
equipment.
All equipment connected to this modem must use shielded cable as the
interconnection means.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference
that may cause undesired operation.
The ADSL Router provides home connectivity to an ADSL service provider
network over an ADSL/Asynchronous Transfer Mode (ATM) physical layer.
The router can run upstream maximum transmission rates of 640Kbps and
downstream maximum transmission rates of 8Mbps. The actual rate depends
on the copper category of your telephone wire, distance from the central office
and the type of ADSL service subscribed. A 10BaseT interface is provided for
connection to an Ethernet LAN or Ethernet-equipped PC, and this router is
easy to install and to configure.
The Conexant AccessRunner CX82310 Single-Chip ADSL Router is
optimized to address the growing demand for high-speed Internet access, and
it does so as a single, highly-integrated and cost-effective solution.
Featuring a USB 1.1-compliant interface and an IEEE 802.3-compliant
Ethernet MAC interface to provide connectivity options, the CX82310 does not
rely on host PC drivers, and thus is not limited by them. The result is extreme
ease-of-use with active auto selection of the interface and simultaneous
operation of both USB and Ethernet. All setup and provisioning is
accomplished via a simple intuitive Web interface which further enhances the
user experience.