Filter
Top Products
be filtered out. If the is selected, then the packets will be
forwarded to the destination PC.
When the bridge filtering is enabled, enter
, select and click . Then all
incoming WAN and LAN Ethernet packets matched with this
destination MAC address will be filtered out. If the is selected,
then the packets will be forwarded to the destination PC.
Enter the hexadecimal number for the Ethernet type field in
Ethernet_II packets. For example, 0800 is for IP protocol.
The page allows the user to save the new configuration to the
flash and reboot the system.
When the configurations are changes via the Web pages, the
new settings need to be saved into the flash, so it is necessary
to go to this Save Settings page to save and reboot the system
for the changes to be taken effect.
During the Save and Reboot, the following Web page will be
displayed “Your setting are being saved and the modem is being