Filter
Top Products
4: Quick Start
WiSpan User Guide 17
The passphrase input is safer because it is up to 63 chars
long. ASCII input is a maximum of 5 (WEP64) or 13
(WEP128) characters long and limits the number of key
combinations.
Please refer to the other equipment’s manual to determine
the passphrase input style recommended.
Note: Lantronix recommends using a passphrase of 20
characters or more for maximum security.
TX Key index Select the WEP key used for transmissions from your
access point. Enter a value from 1 to 4.
WPA: The WiSpan firmware allows only Pre-Shared Keys (PSK) for authentication.
Display current key (N) ?
Change key (N) ?
Key type 0=hex, 1=passphrase (1) ?
Enter key: () ?
It is strongly recommended to use a passphrase of 20
chars or more!
Encryption: 0=TKIP, 1=TKIP+WEP (1)
Display current
key
Select Y (Yes) at the prompt to show the currently configured
key/passphrase
Change key Select Y (Yes) to modify the currently configured key.
Key type Indicate whether the new key is in hexadecimal or passphrase
format.
Enter key
Enter the passphrase. The maximum length is 63 characters.
Note: Lantronix recommends using a passphrase of 20
characters or more for maximum security.
Encryption Set the type to the minimum required security level. The “+” sign
indicates that the group (broadcast) encryption method is
different from the pairwise (unicast) encryption (WEP and TKIP).
802.11i-PSK/WPA2-Personal:
Display current key (N) ?
Change key (N) ? Y
Key type 0=hex, 1=passphrase (1) ?
Enter key: () ?
It is strongly recommended to use a passphrase of 20
chars or more!
Encryption: 0=CCMP, 1=CCMP+TKIP, 2=CCMP+WEP, 3=TKIP,
4=TKIP+WEP (4) ?
Display current
key
Select Y (Yes) to show the currently configured
key/passphrase.
Change key Select Y (Yes) to modify the currently configured key.
Key type Indicate whether the new key is in hexadecimal or
passphrase format.
Enter key Enter the passphrase. The maximum length is 63 characters.