Filter
Top Products
B:Compliance
WiSpan User Guide 46
Antenna Notice:
This device has been designed to operate with an antenna having a maximum gain of 3
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication.
Exposure of Humans to RF Fields
The installer of this radio equipment must ensure that the antenna is located or pointed
such that it does not emit RF field in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health Canada’s website: www.hc-
sc.gc.ca/rpb
Europe – R&TTE Directive 99/5/EC, Wireless Notice
This product is designated as a Class 2 type radio device that utilizes non-harmonized
frequencies and power levels for Europe. It is marked with the following warning symbol
to bring to your attention to the fact it might not be legal to use this product in every
country. In most cases this product has already been granted permission for use from
individual countries in Europe. If you are unsure, please contact the communications
authority for the country to be operated in.
In addition to this notice, the following countries in Europe have certain restrictions on the
operation of 2.4 GHz WLAN type devices:
Country Restriction
France
Outdoor use is limited to 10mW E.I.R.P within the
frequency band 2454-2483.5 MHz.
Italy
If used outside of own premises, general authorization
is required
Luxembourg General authorization required for public service.
Romania Individual license is required.
Australia & New Zealand – Wireless Notice
This product has been found to be compliant with the wireless regulatory requirements
for Australia and New Zealand and is designated to have met Compliance Level 2.
The compliance mark is designated with the circle and check mark inside is called the “C-
Tick” mark. This C-Tick mark label is located underneath this product and signifies its
compliance, as shown below: