Filter
Top Products
4: Using Setup Mode for Configuration
XPort™ User Guide 37
E-mail Settings
Note: You can change these settings via Telnet or serial connections only,
not on the Web-Manager. To configure e-mail settings via DeviceInstaller,
see E-mail Notification in the DeviceInstaller User Guide on the CD.
The unit can send an e-mail to multiple recipients when a specific trigger event
occurs. There are three separate triggers, based on any combination of the
configurable pins (PIO) when selected as user I/O functions. You can also use a two-
byte serial string to initiate a trigger.
Figure 4-8. E-mail Settings
E-mail Setup
E-mail setup requires you to set up the e-mail server location as follows:
Mail server
The IP address in decimal-dot notation.
Unit
The user name used by the XPort to send e-mail messages.
Domain
The domain name of your e-mail server.
Recipient 1
Full e-mail address of the recipient.
Recipient 2
Full e-mail address of the second recipient.