Filter
Top Products
800P TruAlign Time Recorder User Guide
Page 15
Function 1 – Set Month
When prompted to set the month, use the
+
button to scroll
forward or the
-
button to scroll backwards. With the desired
month showing on the display, press the SET button. The ‘Set
Date’ function (2) will display next.
Example: Set the month from 01 to 10
Important Note: The set up functions of the time recorder are
in sequential order and you must pass through each setting to
complete the programming. Simply press the SET button to
accept the settings that you do not wish to change.
Your time recorder may not be programmed as you desired if
you do not pass through each setting.
Step 1
Press the or
-
button until the display
shows ‘10’.
Step 2
Press the SET button when the month is
correct. The month will be accepted, go to
the ‘Set Date’ function.
Note: If you scroll past the month you wish,
continue pressing the or
-
button until
the desired month displays, then press the
SET button.
1 : 0 1
1 : 1 0
F
unction
#
Month