Filter
Top Products
800P TruAlign Time Recorder User Guide
Page 9
Quick Easy Setup (Table Top Mount)
To setup your 800P, follow these next steps:
Step 1
Separate the back-plate from the
800P by removing the Philips
head screw. Retain the Philips
head screw for later.
Step 2
Plug the AC adapter into the
800P and then plug the wall
adapter into the AC outlet.
Step
3
Secure the back-plate to the 800P
with the Philips head screw being
careful not to pinch the AC cord.
Make sure the bottom of the timecard
shelf is over the edge of the back-
plate before securing the screw.
Place the 800P on a solid flat surface.
You are ready to begin using the 800P.
Note: The time, date and other
settings are factory-set. See “Factory
Settings” to the right. If these settings
are acceptable you are ready to
begin, otherwise see Page 11
“Programming the 800P”.
Factory Settings
Time=U.S. Eastern Time
Daylight Savings=On
Spring Daylight Savings=Second
Sunday in March
Fall Daylight Savings=First
Sunday in November
Displayed Time Format=AM/PM
hours & Minutes
Printed Time Format=AM/PM
hours & Minutes
Day of Week Language=English
Confirmation Beep=Disabled