Lathem DDC2 Time Clock User Manual


 
Page 17 Digital Display Wall Clock Guide
Double Mount - Ceiling
Requires optional mounting kit (SAM0626)
Tools required for mounting the clock:
Flat blade screwdriver
Phillips head screwdriver
15/16" open end wrench
The double ceiling mount plate attaches to a double or single gang box installed securely in the ceiling.
Required wiring should be available through the gang box at time of installation.
» Remove the two chase nipples from the mounting plate posts.
» Run the required wiring from the gang box through one of the mounting posts of the mounting
plate.
» Secure the mounting plate securely to the gang box with the proper screws. (not supplied)
Note: When mounting DDC2 clocks, the short side of the mounting plate must be parallel to the long side
of the clocks. When mounting DDC4 clocks, the long side of the mounting plate must be parallel to the long
side of the clocks.
See page 18, figure 6 for DDC2 details.
See page 19, figure 7 for DDC4 details