Filter
Top Products
LTRx-512 Installer’s Guide
16
You cannot choose function [B] directly. To enter Communications, press [#][9][0][0][#]
Press Display
[#] SELECT FUNCTION CODE
[9] Press [9], then
[0][0] Press [0] twice to see
[B]=COMMUNICATIONS
[#] COMMUNICATIONS SETUP
SELECT BAUD RATE:
[2]400 -OR- [9]600
[2] or [9] Enter [2] for 2400 baud or [9] for 9600 baud (9600 is the default)
9600
(or 2400)
BAUD SELECTED
ENTER TERM ID# 000
Note: If the LTR8-512M will be programmed to call the NIST
Atomic clock, you must select 9600 Baud.
[0]..[9] Enter a unique Terminal ID # from 001-127 (065 is the default)
[3] PRESS [#] TO CONFIRM
[#] Press [#] to accept
-or-
[*] Press [*] to cancel and try again
Congratulations! You have finished the basic setup of your LTRx-512 Master. All of the Master
functions are described in the next section of this guide, such as setting up your bell schedules.
For detailed information, please refer to the User’s Guide.
The Master will exit itself out of Program Mode once you stop using the keypad for 5 minutes or
if you wish to exit programming mode immediately to prevent others from accessing the Master
Clock, simply enter an invalid password. (For example)
[#] SELECT FUNCTION CODE
[0] [0]=ENTER PASSWORD
[#] 99 [#]
PASSWORD: 99