Filter
Top Products
PB42 Portable Receipt Printer User’s Guide 27
Serial Port Settings on the PB42
Parameter Default Setting
Baud rate 115200
Data bits 8
Parity None
Stop bits 1
Flow control Hardware
Note: The PB42 only supports CTS flow control. You must
disable DSR flow control in your printing application while
using serial communications with the PB42.
To connect the PB42 to a PC
1 Connect the 8-pin circular DIN connector to the serial port
on the PB42.
2 Connect the other end of the serial cable to a serial port on
the back of your PC or to a serial adapter on your CK60.
Serial
cable
Serial
port
Connecting the PB42 to the Serial Port of a PC