Filter
Top Products
Table 10. Submenus under the ATA Drive Setup menu (continued)
Item Option Description
Hard Disk Pre-delay
[Disabled] / 3 Seconds / 6 Seconds/ 9
Seconds / 12 Seconds / 15 Seconds
/ 21 Seconds / 30 Seconds
Force the BIOS to delay the
initialization of hard disk drives for up
to 30 seconds. The delay provides
your hard disk drives more time to
spin up before the BIOS initializes
them.
Note: [ ] indicates the default setting.
Table 11. Submenus under the Video Setup menu
Item Option Description
Select Active Video IGD / PEG / PCI / [Auto] Select the primary video device that
will be used for graphic output. If you
select Auto, the system will prioritize
video devices in the following
sequence: PEG (PCI-e Graphics
Device), PCI (PCI Graphics Device),
and IGD (Internal Graphics Device).
Notes: When you select IGD, the
following items will be hidden:
• Pre-Allocated Memory Size
• Total Graphics Memory
• Multi-Monitor Support
Pre-Allocated Memory Size 32 MB / 64 MB / [128 MB] Memory allocated to IGD.
Total Graphics Memory 128MB / 256 MB / [Maximum]
Total memory allocated to graphics
devices.
Note: This function works only
when you are using the Windows XP
operating system on your server.
Multi-Monitor Support Enabled / [Disabled]
Enable or disable the multi-monitor
support function.
Note: [ ] indicates the default setting.
Table 12. Submenus under the Audio Setup menu
Item Option Description
Onboard Audio Controller [Enabled] / Disabled
Enable or disable the onboard audio
controller.
Note: [ ] indicates the default setting.
Chapter 6. Conguring the server 57