Table 2. Cong menu items (continued)
Menu item
Submenu item Selection Comments
USB UEFI BIOS Support
• Disabled
• Enabled
Enable or disable boot support
from USB storage devices.
USB
USB 3.0 Mode
• Disabled
• Enabled
• Auto
Set the USB 3.0 controller mode
for the ports shared between
USB 2.0 and USB 3.0 controller.
If you select Auto, it enables you
to connect and route appropriate
USB 3.0 or USB 2.0 connectors.
If you select Enabled, it enables
the USB 3.0 mode and allows
the USB 3.0 to be supported
in the Windows 8 operating
system.
If you select Disabled, it
disables and hides the the USB
3.0 controller, and the USB 3.0
connectors will work as USB 2.0
connectors.
Fn and Ctrl Key swap
• Disabled
• Enabled
If you select Enabled, the Fn key
works as the Ctrl key, and the
Ctrl key works as the Fn key.
Note: Even when Enabled is
selected, you need to press the
Fn key to resume the computer
from sleep mode to normal
operation.
Fn Key Lock • Disabled
• Enabled
Enable or disable the Fn key
lock.
If you select Enabled, you can
press the Fn key once to keep
it in a pressed condition, then
press the desired key. This
is equivalent to pressing the
desired key simultaneously with
the Fn key. If you press the Fn
key twice, the state is locked
until you press the Fn key again.
Keyboard/Mouse
Change to “F1-F12 keys”
• Default
• Legacy
If you select Default, you can
press F1-F12 directly to initiate
special functions illustrated
on each key. If you select
Legacy you need to press Fn
and the corresponding key
simultaneously to initiate the
special functions illustrated on
each key.
Chapter 7. Advanced conguration 69