Lenovo 3444GXU Tablet User Manual


 
To install a x module, run the EXE le in a subfolder and follow the instructions on the screen.
Installing the Windows 8 operating system
Before you start, print these instructions.
Before you start, print these instructions.
To install the Windows 8 operating system and its related software on your computer, do the following:
1. Start ThinkPad Setup.
2. Select Startup Boot.
3. Change the boot priority order to boot your computer from the drive that contains the Windows
8 operating system installer.
4. Press F10.
5. Connect the drive that contains the Windows 8 operating system installer to your computer, and
restart the computer.
6. Install the Intel Chipset Support for Windows 2000/XP/Vista/7/8. To do this, run Setup.exe in
C:\SWTOOLS\DRIVERS\INTELINF\innst_autol.
7. Install device drivers. See “Installing other device drivers and software on the Windows 7 operating
system” on page 68.
Installing the Windows 8 update module package
For information about each x module, go to the Microsoft Knowledge Base homepage at
http://support.microsoft.com/, type the number of the x module you need in the search eld, and click
Search.
Note: The Web site address might change without notice. If the homepage is not displayed, search for it
from the Microsoft top page.
Installing device drivers
The device drivers are available at http://www.lenovo.com/ThinkPadDrivers. Select the product name of
your computer in the Current ThinkPad systems list to see all the device drivers for your computer.
Attention: Always go to http://www.lenovo.com/ThinkPadDrivers for the latest device drivers. Do not
download them from the Windows Update Web site.
Installing the driver for the 4-in-1 media card reader
To use the 4-in-1 media card reader, you need to download and install the Ricoh Multi Card Reader Driver
from the Lenovo Support Web site at:
http://www.lenovo.com/support
Installing the driver for USB 3.0 on the Windows 7 operating system
If your computer is installed with the Windows 7 operating system, it supports USB 3.0 functions. To use
the USB 3.0 connectors, you need to download and install the USB 3.0 driver after you reinstalled the
Windows 7 operating system by doing the following:
1. Go to http://www.lenovo.com/support. Find your model and display the driver links.
2. Select the USB 3.0 driver for the 32-bit or 64-bit operating system and extract it to your local hard
disk drive.
3. Double-click the Setup.exe le in the C:\DRIVERS\WIN\USB3.0\ directory.
Chapter 6. Advanced conguration 67