2090 Antenna kit and LCD rear cover assembly
For access, remove these FRUs in order:
v “1010 Battery pack” on page 71
v “1020 Bottom door” on page 73
v “1030 Hard disk drive (HDD)” on page 75
v “1080 Keyboard” on page 82
v “1090 Palm rest assembly, power-on board assembly (with cable), and
microphone” on page 85
v “1120 System board, fan assembly, and backup battery” on page 92
Table 27. Removal steps of antenna kit and LCD rear cover assembly
1
1
2
2
3
3
4
4
Cable routing: When you install the antenna kit, route the cables as shown in
the figures below. As you route the cables, make sure that they are not subjected
to any tension. Tension could cause the cables to be damaged by the cable
guides, or a wire to be broken.
a: Wireless LAN AUX antenna (black) and wireless WAN AUX antenna
(blue)
b: Wireless LAN MAIN antenna (gray) and wireless WAN MAIN antenna
(red)
a b
106 ThinkPad X100e Hardware Maintenance Manual