Lenovo 4010 Server User Manual


 
Important: Each caution and danger statement in this document is labeled with a number. This number
is used to cross reference an English-language caution or danger statement with translated versions of
the caution or danger statement in the Safety Information manual. For example, if a caution statement is
labeled “Statement 1,” translations for this caution statement are in the Safety Information manual under
“Statement 1.”
Be sure to read and understand all caution and danger statements in this document before you perform
the procedures. Read and understand any additional safety information that comes with the server or an
optional device before you install, remove, or replace the device.
Statement 1
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
Do not connect or disconnect any cables or perform installation, maintenance, or reconguration of this
product during an electrical storm.
Connect all power cords to a properly wired and grounded electrical outlet.
Connect to properly wired outlets any equipment that will be attached to this product.
When possible, use one hand only to connect or disconnect signal cables.
Never turn on any equipment when there is evidence of re, water, or structural damage.
Disconnect the attached power cords, telecommunications systems, networks, and modems before you
open the device covers, unless instructed otherwise in the installation and conguration procedures.
Connect and disconnect cables as described in the following table when installing, moving, or opening
covers on this product or attached devices.
To Connect: To Disconnect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
iv ThinkServer Installation and User Guide