Filter
Top Products
4. Remove the computer cover. See “Removing the computer cover” on page 74.
5. Attach the retention clip that you removed from the previous optical drive to the side of the new optical
drive by installing the two screws to the alignment pins.
6. Align the optical drive in the drive bay and slide the optical drive into the rail until the optical drive
clicks into position.
7. Reinstall the screw 1 to secure the optical drive to the chassis.
8. Go to “Completing the FRU installation” on page 109.
Replacing the memory module
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important Safety
Information” on page 1.
Chapter 9. Replacing FRUs 83