Filter
Top Products
EasyStartup
The ThinkServer EasyStartup program simplifies the process of installing the
operating system and device drivers on your server by performing the following
tasks:
v Detects installed hardware devices
v Guides the network administrator through the process of creating a response file
v Enables you to create scripts or commands that run at the end of the installation
process
v Facilitates the installation of the ThinkServer EasyManage products
v Prepares the hard disk for installation
v Prompts the network administrator to insert the operating-system installation disc
v Initiates an unattended installation of the operating system and device drivers
The
EasyStartup program is provided with your server on DVD. The DVD is self
starting (bootable). The User Guide for the EasyStartup program is on the DVD and
can be accessed directly from the program’s interface. For additional information,
see the RS110 Installation Guide .
Server controls, LEDs, and power
This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off.
Note:
The illustrations in this document show the 3.5-inch hard disk drive models,
unless specifically indicated otherwise.
Front view
The following illustration shows the controls, light-emitting diodes (LEDs), and
connectors on the front of the server.
1 Power-on LED 6 System Error LED
2 Power-control button 7 USB 1 connector
3 Reset button 8 USB 2 connector
4 Hard-disk-drive activity LED 9 CD drive activity LED
5 Locator LED 10 CD-eject button
Power-on LED: When this LED is lit and not flashing, it indicates that the server is
turned on. When this LED is flashing, it indicates that the server is turned off and
still connected to an ac power source. When this LED is off, it indicates that ac
power is not present, or the power supply or the LED itself has failed.
Chapter 1. The ThinkServer RS110 Types 6435, 6436, 6437 and 6438 7