Filter
Top Products
Completing the installation
To complete the installation, complete the following steps:
1. Reinstall the cover. See “Installing the cover” for more information.
2. Install the server in the rack cabinet. See the Rack Installation Instructions that
come with the server for detailed information about how to install the server in a
rack cabinet.
Attention:
v Install the server only in a rack cabinet that has perforated doors.
v Do not leave open space above or below an installed server in the rack
cabinet. To help prevent damage to server components, always install a filler
panel to cover the open space and to help ensure proper air circulation. See
the documentation that comes with the rack cabinet for more information.
3.
Connect the cables and power cords. For more information, see “Connecting
the cables.”
4. Update the server configuration. See “Updating the server configuration” on
page 36 for more information.
Installing the cover
To install the cover, place it into position and slide it forward.
Connecting the cables
The following illustrations show the locations of the input and output connectors on
the front and rear of the server.
Front
1 USB 1 connector 2 USB 2 connector
Chapter 2. Installing optional devices 35