Filter
Top Products
problem. Starting the Rescue and Recovery workspace is easy. To open
Rescue and Recovery, do the following:
1. Turn off your PC, then turn it on again.
2. Watch the screen carefully while your PC starts. When the “To
interrupt normal startup, press the blue Access IBM button” message
is displayed at the lower left of the screen, press the blue Access IBM
button. The Rescue and Recovery workspace opens. A window such as
this will appear:
Note: The window may differ on some models.
3.
After the Rescue and Recovery workspace opens, you can do the
following:
v Rescue and Restore your files, folders, or backups.
v Configure your system settings and passwords.
v Communicate by using the internet and link to the support site.
v Troubleshoot and diagnose problems using diagnostics.
If
you are using the ThinkPad T41/T41p Series computer, you can select
from the following icons:
v Start setup utility opens the BIOS Setup Utility program.
v Recover to factory contents erases all files on primary partition--the
C drive--and installs the software contents present when your PC
was manufactured.)
Solving computer problems
Chapter 2. Solving computer problems 29