Filter
Top Products
Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter (continued)
2
Note: Mounted number of the hard disk drive depends on the models. In
models with RAID features, two hard disk drives that have same FRU no. must
be used in slot 0 (a) and in slot 1 (b).
3
4
b
a
When installing: Make sure that the HDD connector or SSD connector is
attached firmly.
HDD and HDD rubber rails:
5
5
When installing: The rubber rails on the hard disk drive must be attached to
the replacement drive. Otherwise the drive cannot be installed properly.
92 ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual