Filter
Top Products
1180 VGA thermal device/fan and thermal putty
Note: In ThinkPad W701 and W701ds, thermal putty is used between the thermal
device/fan and the video card. The thermal putty is included in the video card
FRU, but is not included in the thermal device/fan FRU. If once you remove the
thermal device/fan, you need to attach new thermal putty on the video card before
you reinstall the thermal device/fan. Order the thermal putty FRU when you
service the thermal device/fan. ThinkPad W700 and W700ds do not have this
thermal putty.
For access, remove these FRUs in order:
v “1010 Battery pack” on page 88
v “1040 Hard disk drive (HDD) cover, HDD and HDD rubber rails or solid state
drive (SSD) and storage converter” on page 91
v “1060 Palm rest or palm rest with fingerprint reader” on page 98
v “1090 Keyboard” on page 104
v “1120 DIMM slot cover and DIMM under keyboard for W701 and W701ds” on
page 111
v “1130 Keyboard bezel and speaker assembly” on page 113
Table 34. Removal steps of VGA thermal device/fan
Note: Loosen the screws 1, 2, 3, and 4, but do not remove them. When
you attach the fan, secure the screws in order as shown in this figure.
For ThinkPad W700 and W701:
1
2
3
4
5
Removing and replacing a FRU 131