Filter
Top Products
Unix
LPD on System V
Before beginning LPD Setup, ensure that an IP Address has been assigned to the LevelOne
Printer Server. Keep the following points in mind:
The remote host name is the name of the LevelOne Printer Server.
The remote printer name is the print queue name for the Logical Printer. Logical printers also
need to be configured on the LevelOne Printer Server itself.
If your UNIX asks for the LPD type, be sure to identify the service type as BSD. The LevelOne
Printer Server’s LPD protocol meets BSD system standards.
In the sample commands shown, printer_name is the name of the Print Queue serviced by the
LevelOne Printer Server, and Spooler_directory is the name of the directory, which is used
to spool the print jobs.
Procedure
Action Sample Command
Stop Print Services
/usr/lib/lpshut
Add a System Printer
/usr/lib/lpadmin -p printer_name -v /dev/null
Restart the Print Services
/usr/lib/lpsched
Enable printing to the new
printer device
enable printer_name
Start accepting jobs for the
new printer device
accept printer_name
Create a spooling directory
mkdir /usr/spool/Spooler_directory
Make spooling daemon the
owner of this directory
chown daemon /usr/spool/Spooler_directory
Create read/write permissions
chmod 775 /usr/spool/Spooler_directory
Give permissions to LPD
processes.
chgrp daemon /usr/spool/Spooler_directory
Add remote printer(s)
See following section
Adding Remote Printers
A remote printer is added by inserting the following line in the /etc/printcap file.
The entry is really one line, but can be entered as shown.
Use a TAB character where shown.
Printer_name|Remote_Printer_Alias:\
[T
AB] :lp=:\
[T
AB] :rm=PS_NAME:\
[T
AB] :rp=Logical_Printer_name:\
[T
AB] :sd=Spooler_directory:\
[T
AB] :mx#0:
- 71 -