Filter
Top Products
11
Figure 3-3. Mount the 24TP+1Fiber Module Switch in an EIA
standard 19-inch Rack
Note: For proper ventilation, allow about at least 4 inches ( 10 cm )
of clearance on the front and 3.4 inches ( 8 cm ) on the back of the
Switch. This is especially important for enclosed rack installation.
Connecting to the Switch
The Console port is a male DB-9 connector that enables a
connection to a PC or terminal for monitoring and configuring the
LevelOne GSW-2490TXM SNMP Switch. Use the supplied RS-232
cable with a female DB-9 connector to connect a terminal or PC to
the Console port.
The Console configuration ( out of band ) allow you to set your
Switch to enable a user at a remote console terminal to
communicate with the LevelOne GSW-2490TXM SNMP Switch as if
the console terminal were directly connected to it.