6
to another Switch or workstation without changing non-crossover or
crossover cabling. ]
Expansion Slots :
For two of the following Optional modules :
1 Port Gigabit 1000Base-T Intelligent Switch Modules,
1 Port Gigabit 1000Base-SX/LX Intelligent Fiber Modules.
1 Port 100Base-FX Intelligent Fiber Module
Console Port :
Console Management can be done through the Console Port. It
requires a direct connection between the LevelOne GSW-2490TXM
SNMP Switch and an end station ( PC ) via a RS-232 cable.
LED Indicators
All LED indicators are located on the front panel of the LevelOne
GSW-2490TXM SNMP Switch. They provide a real-time indication
of system and operational status. The following table
gives descriptions of the LED status and their meanings.
LED Status
Description
Green Power On
PWR
Off Power is Off.
Green The port is operatin
g
at the speed of 100Mbps.
100
Off No device attached or in 10Mbps mode
Figure 2-2 The LED
Indicators