Filter
Top Products
20
Figure 3-18. The Permanent Address Configuration menu
There are 128 static unicast groups and 32 multicast supported by
the system. Two submenus contains in this section.
3.3.1. Static Unicast Address Configuration
You can creat, modify, or delete Static Unicast Address by
selecting entries from the following screen.
Enter the MAC address of a system you wish to set as static
unicast address the port associated with the system. Use<Space
Bar> to toggle the status field between Disable, Forwarding, Filter-
In, and Filter-Out.
• Disable – This Unicast Address entry has no effect to the switch
system.
• Forwarding – All packets designated to this MAC address will be
forward (and only to) the designated port.
• Filter-in – Only packets originated to from this MAC address will
be permitted to enter this port, in other words, packets originated
from other MAC address will be dropped at this port automatically.
• Filter-out – All packets designated to this MAC address will be
blocked (the port is disregard here).
3.3.2. Static Multicast Address Configuration
In the Static Multicast Configuration Menu screen, besides the
MAC Address and Status field (Enable/Disable), you add
member(s) to the group by checking the port(s) with <Space Bar>
key.
3.4. Port Statistics