Filter
Top Products
37
The system can generate a set of SNMP traps upon the occurrence
of those events. By checking a filter event, you are turning off the
filter and enabling the trap associated with that event.
Device Control
Switch Configuration
Figure 4-9. The Switch Configuration upper Menu
1. There are three different mode of VLAN supported in this
system – 802.1Q, Port Base VLAN, MTU/MDU. The choice you
made here will ultimately decide the VLAN mode and function for
entire system (the configuration of the other two VLAN mode will
have no effect to the system behavior).
2. Broadcast Storm Prevention can be set to 6% 0r 20% beside
Disable. The percentage indicates the allowance against the
capacity. When its disable there will be no limitation on the
incoming rate of broadcast / multicast traffic, otherwise limitation on
those traffics will be set to the percentage accordingly.
3. When QoS is enabled you can map the Type of Service of your
choice (according to IEEE 802.1p) to the four priority levels
provided.
Figure 4-10. The Switch Configuration lower Menu