Filter
Top Products
45
Figure 4-23. The Untagged Configuration Menu
All ports are set by default as Untagged in this switch system, to
change port(s) to Tagged just pick the port number you need and
select “No” from the Port Map.
Figure 4-24. The MTU/MDU Per Port VLAN Table in The VLAN
Configuration Menu
This screen as above only reflects the setting you made in Switch
Device Configuration menu - there is no change can be made here.
Should you set the VLAN Mode to <MTU/MDU> mode and <one
Uplink> port then
port 1 ~ 25 will be mapped to port 26 - the uplink port, otherwise,
port 1 ~ 12 and port 13 ~ 24 will be mapped to uplink port 25 and
port 26 accordingly.