Lexmark 131 Printer User Manual


 
Source or process Print side and paper orientation
Manual feeder (duplex printing)
Multipurpose feeder
Preprinted letterhead design is placed faceup. The top edge of the sheet with the logo
should enter the manual feeder last.
ABC
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Tips on using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
Feed transparencies from the 250-sheet tray, manual feeder, or optional multipurpose feeder.
Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure
transparencies are able to withstand temperatures up to 200°C (392°F) without melting, discoloring, offsetting, or
releasing hazardous emissions.
To prevent print quality problems, avoid getting fingerprints on the transparencies.
Before loading transparencies, fan the stack to prevent sheets from sticking together.
We recommend Lexmark part number 12A8240 for lettersize transparencies and Lexmark part number 12A8241
for A4size transparencies.
Tips on using envelopes
Print samples on the envelopes being considered for use before buying large quantities.
When printing on envelopes:
Feed envelopes from the manual feeder or optional multipurpose feeder.
Set the Paper Type to Envelope, and select the envelope size.
Use envelopes designed specifically for laser printers. Check with the manufacturer or vendor to ensure the
envelopes can withstand temperatures up to 200°C (392°F) without sealing, wrinkling, curling excessively, or
releasing hazardous emissions.
For the best performance, use envelopes made from 60 g/m
2
(16 lb bond) paper. Use up to 105 g/m
2
(28 lb bond)
weight for envelopes as long as the cotton content is 25% or less. Allcotton envelopes must not exceed 90 g/m
2
(24 lb bond) weight.
Use only new envelopes.
Printing 67