Filter
Top Products
Menu item Description
Sides (Duplex)
Off
Long edge
Short edge
Specifies how the text and graphics are oriented on the page
Notes:
• Sides (Duplex) is not available on selected printer models.
• Off is the factory default setting.
• Long edge assumes binding along the long edge of the page (left edge for
portrait orientation and top edge for landscape orientation).
• Short edge assumes binding along the short edge of the page (top edge for
portrait orientation and left edge for landscape orientation).
Content
Text
Text/Photo
Photograph
Specifies the type of content that will be scanned to fax
Notes:
• Text is the factory default setting.
• Text is used when the document is mostly text.
• Text/Photo is the factory default setting. Text/Photo is used when the
documents are mostly text or line art.
• Photograph is used when the document is a high-quality photograph or inkjet
print.
Darkness
-4 to +4
Lightens or darkens the output
Note: 0 is the factory default setting.
Dial Prefix
A numeric entry field is provided to enter numbers
Automatic Redial
0–9
Specifies the number of times the printer tries to send the fax to a specified number
Note: 5 is the factory default setting.
Redial Frequency
1–200
Specifies the number of minutes between redials
Note: 3 minutes is the factory default setting.
Behind a PABX
Yes
No
Enables switchboard blind dialing without a dial tone
Note: No is the factory default setting.
Enable ECM
Yes
No
Enables Error Correction Mode for fax jobs
Note: Yes is the factory default setting.
Enable Fax Scans
On
Off
Lets you send faxes by scanning at the printer
Note: On is the factory default setting.
Driver to fax
Yes
No
Allows driver to fax jobs to be sent by the printer
Note: Yes is the factory default setting.
Dial Mode
Tone
Pulse
Specifies the dialing sound, either as a tone or a pulse
Note: Tone is the factory default setting.
Understanding printer menus
128