Filter
Top Products
4
OptraImage Setup Guide
Safety information
General safety
information
Always follow all safety precautions when installing or using
telephone equipment to reduce the risk of fire, electric shock
and injury to persons, including the following:
• If your product is NOT marked with this symbol , it
MUST be connected to a properly grounded electrical
outlet.
• The power cord must be connected to an electrical outlet
near the product and easily accessible.
• Refer service or repairs, other than those described in the
operating instructions, to a professional service person.
• This product is designed, tested, and approved to meet
strict global safety standards with the use of specific
Lexmark components. The safety features of some parts
may not always be obvious. Lexmark is not responsible for
damages resulting from the use of other replacement
parts.
Fax and telephone
safety information
• When installing the Lexmark MarkNet N2501e print
server containing the fax modem port, follow all safety
precautions of any equipment into which the card is being
installed.
• Do not perform the setup procedures in this guide during
a lightning storm.
• Never install or use this equipment in wet locations.
• Before attempting to access the printer compartment
where the option card is installed, you must remove the
fax phone line cable first from the wall outlet, and then
from the fax modem port of the MarkNet print server.