Filter
Top Products
Menu item Description
Base File Name
Limit the base file name to under 53 characters, because the time is added to the
end of the base file name
Note: Scanned-image is the factory default setting.
Background Removal
-4 to +4
Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Contrast
0–5
Best for content
Specifies the contrast of the output
Note: “Best for content” is the factory default setting.
Shadow Detail
-4 to +4
Adjusts the amount of shadow detail visible on a scanned image
Note: 0 is the factory default setting.
Scan edge to edge
On
Off
Specifies if the original document is scanned edge to edge
Note: Off is the factory default setting.
Sharpness
1–5
Adjusts the sharpness of a scanned image
Note: 3 is the factory default setting.
Print Settings
Menu item Description
Copies
1-999
Specifies the number of copies to print
Note: 1 is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Enables duplex (two-sided) printing
Note: 1 sided is the factory default setting.
Print Settings
Setup menu
Menu item Description
Printer Language
PS Emulation
PCL Emulation
Sets the default printer language
Notes:
• PostScript emulation uses a PS interpreter for processing print
jobs. PCL emulation uses a PCL interpreter for processing print
jobs.
• The factory default printer language is PCL Emulation.
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Understanding printer menus
134