Filter
Top Products
3
Setting up your All-In-One
Set up the All-In-One
Multiple methods of setup are possible with the All-In-One you have
purchased. The Setup sheet that came with your All-In-One provides basic
setup instructions. However, you can also connect your All-In-One with
equipment, such as a telephone, an answering machine, or a computer
modem.
Note: The X6100 Series All-In-One is an analog device that
works best when directly connected to the wall jack.
Other devices (such as a telephone or answering
machine) can be successfully attached to pass through
the All-In-One, as described in the setup steps. If you
want a digital connection such as ISDN, DSL, or ADSL,
a third party device is required.
Equipment Benefits See this section:
• All-In-One
• phone cord
Make copies and send
and receive faxes without
the use of a computer.
“Connecting directly to a
telephone wall jack” on
page 5
• All-In-One
• telephone
• two phone cords
• Use the fax line as a
normal telephone line.
• Set up your All-In-One
wherever your
telephone is.
• Make copies and send
and receive faxes
without the use of a
computer.
“Connecting to a
telephone” on page 5